• +0086-371-86162511
  • Zhengzhou, China

sat density of compacted crushed stone

Stay Touch
With Us
Get Quote

News & Detail

  • Density Of Compacted Crushed Stone

    crushed stone compaction density Bouman . 2020-7-27 density of compacted crushed stone. kentucky transportation center resilient modulus of compacted crushed stone aggregate bases research report ktc-05-27/spr 229-01-1f Stone,crushed density in 209 measurement units Stone,crushed weigh(s) 1 602 kilogram per (cubic meter) or 100.01 pound per (cubic foot).

  • DENSITY STANDARDS FOR FIELD COMPACTION OF GRANULAR

    the ASTM Method D 2049 (Relative Density), the Washington Spring-Loaded Vibratory Compactor Method, the Marshall Hammer Test, and the Gyratory Compactor Procedure. The aggregates tested were a granite-gneiss, a crushed gravel, a dolomitic limestone, and a basalt. A prototype field compaction 'testing program was conducted using the same

  • Table 3602/1 CRUSHED STONE BASE AND SUBBASE: MATERIAL

    (MAXIMUM) AASHTO density shall not modified AASHTO AASHTO density shall not exceed 1,5% density shall not exceed 1,5% exceed 1,5% COMPACTION The density requirements of the layer in which the material is used, shall be applicable. REQUIREMENTS (See subclause 3402(b).) In restricted areas the in situ dry density of gravel material

  • In place density of 3/4 Crushed stone Earthwork/grading

    05-05-2011· If the 3/4" crushed stone has sufficient fines in it, a proctor curve can be obtained. We see it used extensively on projects. Ron is correct that nuclear density testing on clean rock is inaccurate at best. The choice between backscatter and direct transmission can be governed by the layer thickness.

  • Stone, crushed volume to weight conversion

    About Stone, crushed 1 cubic meter of Stone, crushed weighs 1 602 kilograms [kg] 1 cubic foot of Stone, crushed weighs 100.00959 pounds [lbs] Stone, crushed weighs 1.602 gram per cubic centimeter or 1 602 kilogram per cubic meter, i.e. density of stone, crushed is equal to 1 602 kg/m³.

  • KENTUCKY TRANSPORTATION CENTER

    The compacted specimens were 6 inches in diameter and 12 inches in height Crushed limestone. base materials included Dense Graded Aggregate (DGA), and Crushed Stone Base (CSB). Number 57s, crushed. river gravel, recycled concrete, and asphalt drainage blanket samples were submitted for testing by engineers of.

  • Type 1 subbase density Materials Man

    It’s 4.5kg (method 3.5 BS 1377)dry density compaction is 2.38T/M3, it is a metamorphic rock whose relative density will be between 2.8/2.9T/M3 and we are achieving densities of 2.26 to 2.4T/M3. I will post the relative density later.

  • FLEXIBLE BASE 247.1. 247.2. A. Aggregate. Table 1 Material

    2. Density Control. Compact to at least 100% of the maximum density determined by Tex-113-E unless otherwise shown on the plans. Determine the moisture content of the material at the beginning and during compaction in accordance with Tex-103-E. The Engineer will determine roadway density of completed sections in accordance with Tex-115-E.

  • Density of Common Building Materials per Cubic Foot RF

    These values for density of some common building materials were collected from sites across the Internet and are generally in agreement with multiple sites. Most are from BOCA or ASAE tables. However, if you have values that you believe are more accurate, use them for your calculations, and please send me an e-mail to let me know what your values are.

  • Density of Cement Sand and Aggregate Cement Density

    Density of Crushed Sand. Their specific density is 2,857 kg/m 3, and specific surface area 310 m 2 /kg. Coarse Aggregate Density. Density of coarse aggregate 20mm and 40mm ranging between 1200 1450 kg/m 3 (75 -90 lb/ft 3) and density of fine aggregate 10mm and 12mm ranging between 1600 1750 kg/m 3 (100 109 lb/ft 3). Density of Concrete

  • Table 3602/1 CRUSHED STONE BASE AND SUBBASE: MATERIAL

    Table 3602/1 CRUSHED STONE BASE AND SUBBASE: MATERIAL REQUIREMENTS Material TYPE OF MATERIAL REQUIREMENTS relative density. bulk relative density. AASHTO density Crushed material:37,5mm or Two thirds of the compacted (unless otherwise specified (ii) Crushed material: layer thickness

  • Suggested Compaction Standards for Crushed Aggregate

    Density tests were made with a water balloon volu terial are required to be compacted to at least 98 percent of the density attained in the test strip (3). were graded crushed stone, it was decided that only the vibrating roller would be used.

  • Strength and stiffness of compacted crushed concrete

    01-12-2013· A comprehensive series of drained triaxial compression tests were performed on crushed concrete aggregate (CCA) moist as compacted. When compared to ordinary natural well-graded gravelly soils, the peak strength and stiffness increase more significantly with dry density, while the effect of the degree of saturation during compaction is much less significant.

  • Stone, crushed volume to weight conversion

    About Stone, crushed; 1 cubic meter of Stone, crushed weighs 1 602 kilograms [kg] 1 cubic foot of Stone, crushed weighs 100.00959 pounds [lbs] Stone, crushed weighs 1.602 gram per cubic centimeter or 1 602 kilogram per cubic meter, i.e. density of stone, crushed is equal to 1 602 kg/m³.In Imperial or US customary measurement system, the density is equal to 100.0096 pound per cubic

  • Density of Cement Sand and Aggregate Cement Density

    The Density of Sand utility returns sand density based on sand conditions (wet/dry in bulk / packaged).. The density of the sand is affected if the sand is compacted (bulged) or loose and if it is wet or dry.When packed, the grains of sand are forced to form a

  • Density of Cement Sand and Aggregate in Kg/m3 list of

    m /crush sand used as partial replacement of fine sand in construction line and the density of M /crush sand is 1750 kg/m3, specific gravity and fineness of modulus is found to be 2.73 and 4.66 respectively. Density of sand in kg/m3. Density of sand

  • Densities of Materials Engineering ToolBox

    Rock crushed: 134: Rubber, ground: 25 50: Rye: 44: Rye, flour: 30: Salt, coarse crushed: 45 55: Salt, granulated: 70 80: Saltpeter: 75: Sand, damp: 100: Sand, dry: 80 100: Sand, loose: 90: Sand with gravel, dry: 108: Sand with gravel, wet: 125: Sand, rammed: 105: Sand, silica: 95: Sand, water filled: 120: Sand, wet: 120: Sand, wet, packed: 130: Sandstone, crushed: 80 95: Sawdust: 4 12: Sea water:

  • Type 1 subbase density Materials Man

    Perhaps on reflection 2.1/2.2 t/M3 should be 2.2/2.3 t/M3. Had another OMC/MDD done and the MDD of 2.4 is now 2.2, so I’m going back to 2.1/2.2 t/M3 compacted density in the layer. Remarkably I’ve had 244 hits on my site for type 1 subbase density and 691 for type one subbase, and that’s not all the search variants such as subbase tonnes M3.

  • what is the density of stone base

    Density of Stone, crushed in 285 units and reference Stone, crushed weighs gram per cubic centimeter or 1 602 kilogram per cubic meter, density of stone, crushed is equal to 1 602 kg/m³. In Imperial or US customary measurement system, the density is equal to 100 pound per cubic foot [lb/ft³], or ounce per cubic inch [oz/inch³] . Get Price

  • Density of Common Building Materials per Cubic Foot

    These values for density of some common building materials were collected from sites across the Internet and are generally in agreement with multiple sites. Most are from BOCA or ASAE tables. However, if you have values that you believe are more accurate, use them for your calculations, and please send me an e-mail to let me know what your values are.

Quick response, N-CAI Heavy Industry welcomes all sectors of society to contact us, we are waiting for your inquiry within 365x24 hours!